FOR USE ON: PLASTIC, HARD RUBBER, CELLULOID
Because of the wide variation of plastics produced, we list only the grades that have proven to be the most popular for use on average work. Many other grades are available if the following grades do not meet your specific needs.
|515-6160||P-17||PLASTIC-KUT COMPOUND (Medium Greasy)
P-17 Plastic-Kut Compound, generally used on a sewed buff for cutting down operations to remove mold marks, flash fins, die marks, etc., on polycarbonates, tenite, cellulose acetates, butyrate’s, phenolics and hard rubber.(Bar color: Tan)
|515-6161||P-18||PLASTIC-COLOR COMPOUND (Dry)
Generally used on a soft, loose buffing wheel to remove slight scratches, die marks and all other surface imperfections and with one operation, produces a high luster-finish. An excellent all-around grade for miscellaneous work.(Bar color: Tan)
|515-6162||P-19||BLACK PLASTIC BUFFING COMPOUND (Medium Greasy)
Recommended for buffing and coloring black or dark colored plastic parts. Especially recommended for hard rubber parts.(Bar color: Black)
|515-6163||P-22||PLASTIC-GLO (Ultra Fine, dry grade)
P-22 Plastic-Glo is an ultra-fine cutting and high coloring compound for bringing out a smooth, brilliant finish on practically every type of plastic. No. P-22 is a pure white compound on the very dry side.Will not glaze on the buff or load up compound into crevices or recesses of the work. Being exceptionally fine, it will not scratch the softest plastic. Nothing better for producing the very finest finishes on transparent plastics.(Bar color: White)
|515-6164||P-27||PLASTIC BUFFING COMPOUND
P-27 is a dry working, high-luster grade formulated with an extremely fine abrasive particle. Recommended when buffing acrylics, lucite, plexi-glass, clear-coat urethane or enamel paints.
Its use on 40-ply Cotton Super-Thick Buffs, type “FD-40”, or Zippo® Bias-cut Flannel Buffs, type “NF’, will remove and/or blend out light scratches, handling marks and other surface imperfections without leaving buffing wheel lap lines.(Bar color: White)
|515-6165||P-112||PLASTIC COMPOUND (Fine)
P-112 is our driest working grade formulated with an extremely fine abrasive particle. Used to impart a brilliant high-gloss finish. Recommended for final color finish on all plastics.(Bar color: White)
Packing Information: All grades made in standard size bar form 2” x 2” x 10”. Also available in extra long lengths and special shapes to fit buffing compound applicators.
Grade P-22 contains 22 bars per case to conform to standard packaging weight limitations of 70 lbs. or less.